Topcon equipment check
Check your equipment and ensure you're up to date
Stay updated on all Topcon equipment here. Find out if your equipment is still supported and discover the latest models available for purchase or hire. Please note that the dates provided may not be exact.
Screens
Year of Release
End of Life Year?
More Information
Screens

GEN 1 S/N Prefix 1400
Topcon GX-55
Year of Release
2016
End of Life Year?
More Information
Please click here.

GEN 1 S/N Prefix 1418
Topcon GX-75
Year of Release
2020
End of Life Year?
More Information
Please click here.

GEN 2 S/N Prefix 1555
Topcon GX-55
Year of Release
2022
End of Life Year?
More Information
Please click here.

GEN 2 S/N Prefix 5555
Topcon GX-75
Year of Release
2022
End of Life Year?
More Information
Please click here.
Communication Hubs
Year of Release
End of Life Year?
More Information
Control Boxes

S/N Prefix 1346
Topcon MC-i4 GNSS
Year of Release
2016
End of Life Year?
More Information
Please click here.

Part Number ending -01
Topcon MC-X1
Year of Release
2018
End of Life Year?
More Information
Please click here.

Part Number ending -03
Topcon MC-X1
Year of Release
2021
End of Life Year?
More Information
Please click here.
Internet Modem
Year of Release
End of Life Year?
More Information
Internet Modems
Receivers
Year of Release
End of Life Year?
More Information
Receivers
Radios
Year of Release
End of Life Year?
More Information
Radios
Tilt Sensors
Year of Release
End of Life Year?
More Information
Tilt Sensors

Multi-directional
Topcon TS-i4 IMU Sensor
Year of Release
2021
End of Life Year?
More Information
Please click here.
01
Screens
Here you'll find all the newest and updated information on your Topcon Screens and where to find the latest equipment.

Compatibility / System - Legacy 3D-MC Display (Pre V12 Software) used with MC-R3 era excavator, dozer, grader and paving systems.
IMPORTANT! Legacy display, no longer supported, replaced by GX-55 and the GX-75
GEN 1
Topcon Gx-60
Introduced in 2010. The GX-60 was actively used until its successor the GX-55.

Compatibility / System - Launched with the X-53i excavator system; used across i-Series V13 Excavator and X-Series v13 Excavator installations.
IMPORTANT! Legacy display; No longer supported, replaced by GX-55 GEN 2 and the GX-75 GEN 2.
GEN 1
topcon gx-55
Introduced in 2016. The GX-55 GEN 1 has the S/N Prefix 1400.

Compatibility / System - Launched with the X-53i excavator system; used across i-Series V15 Excavator and X-Series V15 Excavator installations.
IMPORTANT! Legacy display; No longer supported, replaced by GX-90.
GEN 2
topcon gx-55
Introduced in 2022. The GX-55 GEN 2 has the S/N Prefix 1555. Installed with an improved processor to handle V13 and above 3DMC software.

Compatibility / System - 10 inch displayed used across X-Series V15 and MC-MAX V15 Dozer Systems.
IMPORTANT! Legacy display; No longer supported, replaced by GX-55 GEN 2 and the GX-75 GEN 2.
GEN 1
topcon gx-75
Introduced in 2020. The GX-75 GEN 1 has the S/N Prefix 1418.

Compatibility / System - 10-inch display used across X-Series V15 Excavator and MC-Max V15 Dozer Systems. Will run 3DMC Version 15.
IMPORTANT! Legacy display, unsupported, replaced by GX-90.
GEN 2
topcon gx-75
Introduced in 2025. The GX-75 GEN 2 has the S/N Prefix 5555.

Compatibility / System - Current display for MC-MAX V15 Dozer and X-Series V15 Excavator.
IMPORTANT! Regional introduction was January 2025.
NEW
topcon gx-90
Introduced in 2025. The GX-90 is the current screen produced by Topcon.
02
Communication Hubs
Here you'll find all the newest and updated information on your Topcon Control Boxes and where to find the latest equipment.

Compatibility / System - Legacy GNSS processor used with i-Series V13 Excavator & i-Series V13 masted Dozer Systems.
IMPORTANT! Legacy product no longer manufactured or supported. Following the regional 3G shutdowns, replacement modem boards to run 4G are available for upgrade.
Legacy
topcon mc-i3 gnss
Introduced in 2014 the MC-i3 is an embedded cellular modem, configurations have been affected by regional 3G shutdowns.

Compatibility / System - Combined GNSS processor and cellular modem used in i-Series era system.
IMPORTANT! Legacy product no longer manufactured or supported. Following the regional 3G shutdowns, replacement modem boards to run 4G are available for upgrade.
legacy
topcon mc-i4 gnss
Introduced in 2016. The MC-i4 Early cellular hardware includes 3G units; units beginning with S/N prefix 1346 will required a board upgrade to be able to use 4G.

Compatibility / System - Runs on the X-Series V13 Excavator Systems. Unable to run on the MC-MAX version 15 systems, due to not having the capability to store the machine activation files.
IMPORTANT! Legacy product no longer manufactured or supported. Replaced by the GEN 2 MC-X1 (Part numbers ending in -03)
GEN 1
topcon mc-x1
Introduced in 2018. The GEN 1 has serial numbers ending in -01 and are not longer being manufactured.

Compatibility / System - Runs on the X-Series V15 Excavator Systems and MC-MAX V15 Dozer Systems. The machine activation files are now held on the GEN 2 MC-X1 instead of the screen.
IMPORTANT! For any upgrade options please check if your equipment ends in -01 or -03. For additional machine activation files (OAF) please contact us for additional activations.
GEN 2
topcon MC-x1
Introduced in 2018. The MC-X1 GEN 2 has part numbers ending in -03.

Compatibility / System - Used in MC-MAX Dozer V15 Systems.
IMPORTANT! For additional machine activation files (OAF) please contact us for additional activations.
NEW
topcon mc-x3
Introduced in 2021. The MC-X3 is an integrated controller, radio and cellular unit for MC-MAX V15 Dozer Systems.
03
Internet Modems
Here you'll find all the newest and updated information on your Topcon internet modems and where to find the latest equipment.

Compatibility / System - Compatible with X-Series systems up to Version 15. Originally released as 3G, 4G upgrade available.
IMPORTANT! Legacy product no longer manufactured or supported. Contact us regarding upgrading to 4G.
Legacy
Topcon sl-100
Introduced in 2012. The SL-100 is a Cellular Modem used with X-Series systems.

Compatibility / System - MC-X Systems V15, Supports Sitelink3D communications and network corrections.
IMPORTANT! Best used with a diversity antenna, with cell & cell aux connections.
NEW
topcon sl-25
Introduced in 2021. The SL-25 is a 4G modem designed for MC-X series systems.
04
Receivers
Here you'll find all the newest and updated information on your Topcon Receivers and where to find the latest equipment.

Compatibility / System - i-Series systems up to Version 12.
IMPORTANT! Legacy product no longer manufactured or supported.
Legacy
topcon pg-s3
Introduced in 2014. The PG-S3 is a heavy-duty GNSS antenna for i-Series systems, used on Excavators and Dozers.

Compatibility / System - Mainly used with MC mobile systems where the receiver is also used as a rover.
IMPORTANT! Originally introduced as a 5hz receiver, an OAF to upgrade to 20hz may be required for some configurations. Constellation coverage is dependent on the OAF you have installed.
new
topcon gr-i3F
Introduced in 2018. The Multi-Constellation GR-i3 GNSS Receiver was introduced with X-Series systems. The GR-i3 can be removed from the stack and fitted to a GPS pole as a rover.

Compatibility / System - Used in MC-MAX Dozer V15 Systems.
IMPORTANT! For additional machine activation files (OAF) please contact us for additional activations.
NEW
topcon gr-i3
Introduced in 2021. The MC-X3 is an integrated controller, radio and cellular unit for MC-MAX V15 Dozer Systems.
05
Radios
Here you'll find all the newest and updated information on your Topcon Radios and where to find the latest equipment.

Compatibility / System - Compatible with X-Series V12 to V15 Excavator Systems.
IMPORTANT! These have to be running the Topcon firmware, which is embedded at the point of manufacturing.
Legacy
satel easy-proof
Introduced in 2018. The Satel Easy-Proof is a fully programmable radio, which can be onfigured through MC-X config, from the incab screen. It receives base station corrections via radio.

Compatibility / System - Only compatible with i-Series Systems.
IMPORTANT! This is not compatible with X-Series Systems.
legacy
satel easy
Introduced in 2014. The Satteline Easy Radio is a fully programmable radio used for receiving base station corrections.

Compatibility / System - Compatible with current X-Series V15 Systems.
IMPORTANT! This is not compatible with i-Series or X-Series V12.
new
topcon ur-s1 radio
Introduced in 2025. The UR-S1 is a fully programmable radio, released following the acquisition of Satel by Topcon.
06
Tilt Sensors
Here you'll find all the newest and updated information on your Topcon Tilt Sensors and where to find the latest equipment.

Compatibility / System - Compatible with Topcon i-Series Excavator Systems.
IMPORTANT! Single slope sensor cannot be used as a body sensor as the body sensor provides dual axis readings. The standard TS-i3s cannot be used on X-Series Systems.
Legacy
topcon ts-i3
Introduced in 2014. Topcon TS-i3 Single Slope Sensor.

Compatibility / System - Compatible with Topcon i-Series V12 Excavator Systems.
IMPORTANT! The standard TS-i3d cannot be used on X-Series Systems.
legacy
topcon ts-i3d
Introduced in 2014. Topcon TS-i3s dual slope sensor.

Compatibility / System - Compatible with X-Series V13 & V15 Excavator Systems.
IMPORTANT! The standard TS-i3s cannot be used on X-Series Systems.
current
topcon ts-i3s/500
Introduced in 2018. Topcon TS-i3s/500 dual slope sensor.

Compatibility / System - Compatible with X-Series V13 Excavator Systems.
IMPORTANT! The standard TS-i3d cannot be used on X-Series Systems.
current
topcon ts-i3d/500
Introduced in 2018. Topcon TS-i3d/500 dual slope sensor.

Compatibility / System - X-Series V15 Excavator Systems & MC-MAX V15 Dozer Systems.
IMPORTANT! SOMETHING HERE
current
topcon ts-i4 imu
Introduced in 2021. The TS-i4 is a IMU Multi-directional sensor, released for Topcon 3DMC software V15.
about sealand survey
The UK's leading independent providers of surveying and construction equipment solutions.
Sealand Survey Centre is able to offer full service for surveying and machine control equipment as suppliers, servicing and installation providers. With 12 specialist staff operating from our office in North Wales, Sealand is one of Topcon's authorised dealers.
